NEWS
CNC Router Machine Installation
Release time：
2017-09-08
1. Open computers to install the corresponding driver and application software. 2.Environment: Surrounding humidity: 0-40degrees, in the process of stopping running: make sure the temperature is above
1. Open computers to install the corresponding driver and application software.
2.Environment:
Surrounding humidity: 0-40degrees, in the process of stopping running: make sure the temperature is above zero (the liquid within the water-cooled spindle should be released if the temperature is below 0 degree)
Humidity: Maximum 75% non-condensing (relative humidity) Short-term: 95% (one month)
After finished installation, set the internal parameter. Open machine to check if the machine running direction is correct, then reset accurate.
4.After received the machine, open packaging, move machine from wood box, and placed it in the level position. In the process of placing, do not to bump the machine
5. When placing finished, open tool box and take wires to connect power. If it is air plugs you get, please connect it by the number marked on them to check if the circuit is
Related News
Contact:
Manager: Sophia Liu
Phone&Fax:+8653188986282
Mobile :+8615063350930
Email: xlcncrouter@gmail.com
Skype: sophialiu_2009
Office Add: Digital Ginza Plaza
No. 43 Jiefang Road Lixia District Jinan
city Shandong province China
Should you have any comment or product inquiry, please
complete the below form and we will get back to you soon.